On this page you will find my design of the cabinet as well as some explanation
of why I did things the way I did. I am always open to suggestions...
I know it's probably not the easiest drawing to read, but here is the
If you don't understand something, let
me know and I will try to explain it better. Hopefully it should
all come together during the actual construction
of the cabinet
The base is a 2x6, used as a kickspace
The cabinet itself is built on the 2x6 base
The dotted lines are the interior framing lines from the 1x2's
The 1x2's will be jointed together for a stronger joint.
On places where the framing intersects, I will not use 1x2's jointed together,
just screw the interection together (I was originally going to use 2x4's
throughout but my Dad thought using jointed 1x2's for the same effect would
be easier to do: not having to cut the dado's out of a 2x4)
On to "PC Hardware"
This page last updated 8/30/99